Chemical resistant work gloves manufacturer 2023: The risk of exposure to hazardous materials and poor-quality protective wear can limit the productivity and safety of workers. Hazardous Chemicals, Liquids, and Oil: Dealing with machines usually in contact with black oils, lubricants, aerosol Spray, gear oil, and chemicals liquids. Rough and Sharp-Edged Objects: Exposed to risks of injuries due to handling machinery works. Hand Fatigue: Long hours of working can cause discomfort in hands especially handling heavy machines or objects. The excellent grip performance of our gloves allows less force required to handle machine parts or objects, thus increasing work efficiency. Discover even more info at chemical resistant gloves.
Microfibre is synthetic fabric with very small fibres or threads. The diameter of microfibre is about 20 times smaller than a human hair. The most common types of microfibres are made from polyesters, polyamides or a combination of polyester, polyamide, and polypropylene. The shape, size and combinations of synthetic fibres are selected for specific characteristics, including softness, toughness, absorption, water repellency, electrostatics, and filtering. Features: Breathable fabric; Retains original shape; Comfort is similar to natural fibres and soft; High performance moisture wicking ability; Enhanced durability; Lightweight; Easily maintained and cleaned.
Risk of Injuries: Handling food processing tools and machines could put workers at risk if without proper protective wear. Our Solutions: Accelerate Work Efficiency: Our protective wear with superior grip and unmatched comfort reduces mistakes and shortens the time consumed when handling food products and processing machines. Safeguard against Biohazards: Our protective wears are made of professionally selected quality materials that help protect food and workers against contamination and injury during handling.
The EN 388 standard underwent revision in 2016. SHOWA gloves are in the process of being recertified by the notified bodies to conform to the revised standard. Currently reported ISO 13997 cut resistance values are indications until officially certified. In the meantime the existing certificates according to EN 388: 2003 remain valid. ABRASION RESISTANCE (0-4) : Number of cycles required to abrade a hole using abrasive paper in a circular sample of glove material under constant pressure and motion. Number of cycles required to cut a sample using a stainless steel circular blade under constant speed and low force of 5 newtons (approx. 510g). For materials that dull the blade, after a certain number of cycles without cut through, the ISO 13997 test is performed and becomes the reference cut resistance value.
Eco Best: Same glove, better for the planet An industry first, SHOWA’s Eco Best Technology® (EBT) offers the same glove with no compromise in its quality, performance, and protection – but better for the planet. EBT accelerates the biodegradation of nitrile to organic compounds in biologically active landfills, an ability validated by independent certified laboratories using international test methods ASTM D5511 and D5526. Thanks to its special composition, SHOWA EBT gloves decompose within 1 to 5 years in active landfills, where regular nitrile gloves require over 100 years, thus reducing the impact gloves have on the environment.
Degradation is the deleterious change in one or more properties of a protective glove material due to contact with a chemical. Indications of degradation can be delaminating, discoloration, hardening, softening, dimensional change, loss of tensile strength, etc. It is determined by measuring the percentage change in puncture resistance of the glove material after a continuous contact for 1 hour of the external surface with the challenge test chemical. The results of the degradation test must appear in the information leafet for all three glove types. Find additional details at https://excia.asia/.