Quality pin marking machine provider? CPC-500(Excel) is the predecessor of the CPC-500G3(Excel), and the computer system is self-contained. The CPC-500 is able to produce intricate designs in a fast, precise way that traditional methods unable to achieve. It is commonly used in gold and silver jewellery, glasses and watches, hardware products, tool accessories, etc. Find additional details at desktop laser marking machine. CUV is applied to both metal and nonmetal materials. It is widely used in the jade, wood, acrylic, crystal, semi-precious stone, glass, plastic, gift, jewelry, hardware, and etc. The “cold” laser process results in very fine marking. Also capable of subsurface marking on transparent materials such as crystals. Provide fine marking on non-metal that other types of lasers cannot.
Directivity is good – ordinary light source (the sun, incandescent or fluorescent lamp) to emit light in all directions, but the direction of the laser light can be limited to less than a few milliradians solid angle, which makes the illumination in the irradiation direction of 10 million times. The laser diffuses every 200 kilometres diameter less than 1 meter, if shoots to the moon which is 3.8 × 105km from the Earth, the beam diffuses less than 2 kilometres, but the ordinary searchlight diffuses several kilometres to dozens of meters. Laser collimation, guidance and ranging make use of good directivity.
They can do high-speed cutting on flat surfaces and cylindrical objects such as bangles, rings, etc. They are equipped with a highly efficient material loss recovery design and come with an auto-feed system for conveyor cutting. The CPC-500 is able to cut gold/silver of thickness up to 1.2mm whereas the CPC-500 Excel is able to cut up to 3mm. Cosmo fiber laser cutting machine factory’s CPC-15EV is a water-cooled fiber laser cutting machine. It is highly recommended to cut non-precious metals such as iron, copper, aluminium, lead, zinc, steel, etc. It is able to cut flat surfaces. Its cutting area is 250mm×400mm making it good to cut long strips.
Laser marking machines use laser beams to reveal the deep of material or cause physical changes in the object, then operational traces appear so that the material emerges with the desired graphics, images, text, and other permanent marks. Laser marking processing is divided into two types: thermal processing and cold processing. In thermal processing, a high-energy-density laser beam is irradiated on the surface of the material being processed. The absorbed laser energy causes a thermal excitation process in the irradiated area, causing the temperature of the material surface (or coating) to rise, resulting in metamorphism, melting, ablation, evaporation, and other phenomena.
CPM-R8 has the same functions as the CPM-R except it has a built-in touchscreen WINDOWS OS computer. It is a plug-and-play all-in-one machine. It can be used with either a wired or wireless mouse and keyboard. It can mark the inside and outside of rings and bangles as well as flat surfaces. It produces a shiny mark with no material loss and no need for additional polishing. CDC-A3 is applicable for flat cutting of metal materials with a simple programming design, low maintenance cost, high precision. It is able to cut on materials with a minimum thickness of 0.1mm. The cutter is made of industrial-grade diamond. You can create unlimited designs by changing the position of cutters. Its fully enclosed design, keep all material lost to the minimum. Find additional information at https://www.cosmolaser.net/.