Excellent led street light wholesale manufacturer: LED lights need protection from the environment to avoid damage, while their light should also pass without absorption through the front lens. Therefore, the front lens can be plastic or glass. A polycarbonate lens provides strength against impact, less weight, easier maintenance, and flexibility. Meanwhile, glass provides optical clarity and less likelihood of yellowing. Polycarbonate is ideal for street lights as it allows for better safety and strength against harsh conditions while being easy to replace. See additional info at customized led flood light.
Common lighting elements installed in floodlights are Halogen, LED, metal halide, and high-pressure sodium lamps. The type of heating element significantly defines the response and the working hours of a floodlight. Applications: Residential: Backyards, rooftops, courtyard, lawn areas; Commercial: Parking lots, outdoor advertising, building illumination; Industrial: Large warehouses, manufacturing setups, process industry halls; Public: Streetlights, metro stations, airports, train halls; Sports: Stadium, football grounds, tennis courts, and more. Based on feedback, buyers prefer them for outdoor field lighting and security fence lighting due to their bright white light. However, they usually generate a lot of heat and are less energy efficient than their LED counterparts.
IK stands for Impact-Kinetic. Similar to ingress protection, impact protection, or the IK rating, also tells a big story in a number. If an LED roadway light manufacturer mentions an IK09 rating in its product specs, the product has an impact resistance of 10 joules. It is equivalent to a 5-kg object dropping from 20cm in height. A typical roadway lighting LED consists of aluminum as the base material and acts as a heatsink. However, thermal pastes and pads play a vital role in ensuring the heat is conducted from the LED chip to the case and the driver and adequately dissipated to the environment. High-end street lights use high-quality and adequate quantities of thermal paste and padding underneath the substrate or PCB to ensure proper heat transfer. Similarly, the driver is also thermally bonded with the casing through adhesives, pads, and thermal pastes. There are a couple of things to look for in an LED roadway light: the body should be made of high-conductivity material, the design may include a fin-like structure outside, and all the heat-generating components should be heatsinked appropriately.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
Shanghai CHZ Lighting practices the standardized production and carries out strict quality control to ensure the best quality of LED street lights etc, saving time and cost for both parties and bringing the greatest benefits to customers. Founded in 2010, Shanghai CHZ Lighting Co., Ltd. is a high tech enterprise engaged in the research; and development, production and sales of LED lighting products. CHZ lighting fixtures have obtained many international quality certificates, including ENEC+, TUV, ENEC, CB, ROHS, UL, DLC, etc.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Find even more information on https://www.chz-lighting.com/.
Nowadays, the LED street light design and manufacturing technology is getting better and better. Whether it is a modular led street light or an integrated led street light, the quality can meet the needs of different usage scenarios. The specific choice of light source still needs to be based on actual needs and verified with the supplier determine. CHZ lighting company can provide complete lighting solutions, you are welcome to contact us.
Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.
The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.