Compression manufacturer and supplier 2025: History and Development of Compression Molding – The origins of compression molding trace back to the early 20th century, coinciding with the development of thermosetting plastics like Bakelite. Initially, it provided a practical way to mass-produce plastic components for electrical insulators, handles, and decorative items. Over time, as synthetic polymers advanced, compression molding adapted to accommodate reinforced composites, such as glass- and carbon-fiber materials. These innovations expanded its applications to aerospace and automotive industries, where lightweight yet strong parts are crucial. By the 1950s, the process became a cornerstone for manufacturing fiber-reinforced plastics, particularly for high-performance structural components. Modern developments, including computer-controlled presses and precision mold design, have significantly enhanced consistency and efficiency. Today, compression molding remains one of the most reliable methods for producing composite and thermoset parts, balancing tradition with innovation to meet contemporary industrial demands. See more information at blow mold services.
Materials Used in Blow Molding – The success of blow molding depends largely on the choice of plastic. Common materials include high-density polyethylene (HDPE) , polyethylene terephthalate (PET) , polypropylene (PP) , and polyvinyl chloride (PVC) . HDPE is widely used for its toughness and chemical resistance, making it ideal for detergent and milk bottles. PET is preferred for clear, lightweight beverage bottles due to its strength and recyclability. PP offers superior heat resistance, used in containers that must endure higher temperatures. PVC, once popular, has seen reduced use due to environmental concerns. Modern trends emphasize sustainability, pushing manufacturers toward bio-based plastics and recyclable polymers. Material selection not only influences mechanical properties but also affects processing conditions like temperature, cooling time, and blow pressure. As material science advances, new resins continue to expand the possibilities for blow-molded designs, enabling stronger, lighter, and more sustainable products.
In order to verify that our mold is correct, we will conduct multiple trial runs of the mold, each time not less than 50 samples are spot-checked, and the product changes at different temperatures and different cooling times will be tested. These samples will be in the truth. Send it to the buyer for verification, and a list of equipment parameters for product production will be attached as your production basis. Every buyer expects quick response, high-quality and low-cost manufacturing feedback, which is beneficial for commercial activities. But this is contradictory in the manufacturing industry. High-quality injection molds must choose high-cost materials, and after high-precision cnc machining, all steps must use the best labor and accessories, and all processes must comply with international standards. standard. In Mulan Group, we can achieve a quick response quotation process at any time, but after facing high-quality mold requirements, we can only send a reasonable quotation, and will not unreasonably lower the market price. It depends on what we will do for you To save technology development costs, we refuse to cut corners. But compared with the actual use value of molds.
The main difference between injection molding and blow molding is the types of products that can be produced. Generally, blow molding is the manufacture of hollow containers, such as bottles, pots, barrels and so on. There is no injection port on the surface, Injection molding is used to produce solid parts. The plastic granular material is first melted, and then injected into a closed mold under high pressure for shaping. There will be traces of the injection port on the surface. Usually, compression molding parts select mold steel or aluminum alloy processing to make molds according to the product structure and material. No matter which material is selected, high-quality molds from professional mold manufacturers are very important. Mulan Group, as a highly professional mold manufacturer, Through professional knowledge and advanced manufacturing equipment to provide you with the most precise and efficient mold solutions, and provide the most economically competitive Chinese compression molding manufacturer price quote.
The process of rotational molding is much simpler than the manufacturing process that relies on pressure molding, but in fact it requires very rich experience and technical knowledge. While the material cannot be controlled by high pressure, the environmental temperature, environmental humidity, mold type, material specification, material Factors such as pretreatment quality will directly affect the final quality of rotomolding products. Put the powdered plastic into the hollow mold. Close the mold and rotate along the two axes. Heating the mold during the rotation process to melt the powder material. After all the materials are melted, cool the mold.After the product has solidified, open the mold and take out the product.
Plastic overmolding metal: We use CNC machining/metal casting/sheet metal bending/sheet metal stamping on metal materials to pre-mold the designed substrate, and then wrap the plastic around the metal substrate at one time through overmolding, such as: pipe connectors , Electronic components, etc. Rubber overmolding metal: We use CNC machining/metal casting/sheet metal bending/sheet metal stamping on metal materials to pre-mold the designed substrate, and then wrap the rubber material on the surface of the metal substrate through overmolding to present a soft rubber layer. Such as fitness equipment, medical supplies, hammer handles, children’s toys, etc. Read more details on china-plasticparts.com.
In the production process, it is difficult to completely fill the mold, and there are certain technical requirements. After the curing stage is over, different products have different stiffness, which has an impact on product performance. For products with high dimensional accuracy requirements (especially for multi-cavity molds), the process is somewhat short. The flash of the final product is thicker, and the workload of removing the flash is large. The shortcomings of compression molding are that the mold manufacturing is complicated, the investment is relatively large, and coupled with the limitation of the press, it is most suitable for mass production of small and medium composite materials.
MULAN Company is a leading manufacturer of sheet metal parts in China, offering excellent quality and a wide range of products. With their commitment to delivering top-notch products, MULAN has established itself as a trusted name in the industry. From precision sheet metal production to comprehensive metal fabrication services, MULAN has something to offer for every need. In today’s fast-paced manufacturing industry, finding a reliable CNC machining parts supplier can be a daunting task. However, when it comes to sourcing high-quality CNC machining parts, Mulan Group is undeniably a global leader.