Industrial centrifuge supplier today: Shenzhou Machinery is a subsidiary of Shenzhou Group.Which was established in 1980,conveying an area of 80000M2 ,there are 2500 staffs and employee in our company.200 of them are technicians and engineers.It has obtained the approvals and certifications of both CE and ISO. Some of our machines gained the new technology invent patent.We are on of the world’s leading manufacturers of decanter centrifuge,disc centrifuge,tubular centrifuge,separation systems and drying equipment.Now there are over 180 series or decanter centrifuges and disc separators used home and abroad.Including U.S.A , Canada ,Australia,Russia ,Brazil,Singapore and so on totally 70 countries. Read additional info at Industrial Centrifuge.
What industry is the decanter centrifuge used for? Decanter centrifuge working principle：Centrifuges are useful in most industries where solids, liquids, and gases are mixed into a single substance, but separating the components is necessary. For example, decanters (also known as solid bowl centrifuges) continuously separate solids from liquids in slurries and therefore play an essential role in wastewater treatment, chemical, petroleum, and food processing industries. The basic principle of a decanter centrifuge relies on buoyant separation. The denser ingredients will fall to the bottom of the mixture while the less dense ones are suspended above. Due to a large centrifugal force, decanters rotate to separate the substances inside quickly. Before decanters were used, components took hours to settle, but a decanter centrifuge can take only a few seconds.
The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country.
The three-phase decanter centrifuge is one common piece of machinery for separating solids, heavy, and light liquids based on specific gravity differences. 3 Phase Decanter Shenzhou Machinery Separation is one manufacturer offering a three-phase decanter centrifuge based on over a decade of practical experience. This machine is used in many modern industries, including oily sludge, slaughterhouse wastewater, kitchen waste, oil clarification, fish products, wheat starch production, etc. The 3 Phase decanter centrifuge has seven main mechanisms that work together as follows: the feeding component, the underframe component, the bowl component, the screw component, the differential gearbox, the drive component, and the collection box component. The feeding component receives the materials to be separated from the conveying system.
The full name of the decanter centrifuge is the horizontal screw decanter centrifuge, which is a widely used equipment in the field of industrial solid-liquid separation. According to the characteristics of different materials in different industries, Decanter centrifuge is divided into dewatering, separation, and clarifying decanter centrifuge. With centripetal pump technology, decanter centrifuge can also realize the 3-phase separation of liquid, liquid, and solids or two liquid phase separation. Decanter centrifuge can separate over 50%(v/v) solids from liquids on a continuous basis.Typical industrial decanter applications include Crude oil tank bottoms ,waste oil industrial,wastewater,sludge Decantering,Fish meal,WVO/UVO Desludging,Paint sludge ,Etc. If you are looking for a decanter centrifuge manufacturer, Shenzhou Machinery is your best choice. See additional details at https://www.lnszjx.com/.
The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.