Top rated alloy wheels manufacturer and supplier? At present, the performance test standards of wheel hub mainly include: Japanese JWL VIA standard; German TUV standard; American SAE Standard. German TUV standards are the most stringent, which is why European wheel brands are heavy. The following European BBS 19X8.5J cast wheel hub weighs 11.65KG, compared with other cheap cast wheel 19X8.5J hub weight is 10.68kg. Attached is the hub weight reference table, if you buy a particularly light hub , pay attention. Change HUB SAFETY FIRST!! See additional information on alloy wheel manufacturers.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.
The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. See extra information on https://www.jjjwheel.com/.